Replacing Right Backrest Cover for Rear Seat

52 26 412 - Replacing right backrest cover for rear seat





Special tools required:






Necessary preliminary tasks:
- Remove right backrest Removing and Installing/Replacing Both Backrests For Rear Seat
- Remove guide sleeves Removing and Installing/Replacing All Guide Sleeves for Rear Head Restraints





Release screw (1).
Tightening torque 52 26 04AZ 52 26 Rear Seats (Through-Loading System).
Remove outer mount (2).





Lever out backrest cover all round with special tool 00 9 317 or screwdriver.
Remove backrest cover with padding from carrier section.





Detaching cover and padding:
- Release all retainers in marked area
- Remove cover from padding.
- Remove remaining retainers from cover and padding






Installation:
Insert new retainer (2) with special tool 52 0 050 52 0 050 Pliers.
In so doing, enclose wire in padding and trim wire of cover and bend closed.

1. Padding
2. Retainer
3. Trim thread in padding
4. Trim thread in seat cover
5. Seat cover





Replacing cover:
- Remove all trim wires from cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets