Removing and Installing/Replacing Eject Box (Cordless Keypad Handset)

84 11 610 - Removing and installing/replacing eject box (cordless keypad handset)





Necessary preliminary tasks:
- If necessary, remove cordless keypad handset from eject box
- Remove fresh-air grille in rear cabin Removing and Installing/Replacing Rear Cabin Fresh-Air Grille





If necessary, disconnect antenna plug (1).
Disconnect plug connection (2).
Unlock socket housing on plug connection (2) and slide out Socket Housings, 2x21-, 2x27-pin, Hybrid Systems MQS/MPQ, Elo/Elo-Power contact carrier.





Note:
Unlock eject box (1) and fold up.

Release screws (2).

Feed out plug connection and remove eject box (1).

Installation:
Ensure correct cable routing in eject box (1).