Remove and Installing Complete Night Vision Camera (From 03/2007)

66 54 010 - Remove and installing complete night vision camera (from 03/07)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove front bumper trim 51 11 156 Removing and Installing Front Bumper Trim
- Remove impact absorber in working area





Drill out rivets (1).





Important!
Secure night vision camera (1) against falling down.

Disconnect plug connection (2) and release screw (3).

Tightening torque 66 54 1AZ [1][2]Forward Looking Camera.





Important!
Secure night vision camera (1) against falling down.

Disconnect hose connection (2) and unclip cable fastener (3).





After installation:
- Fill up with washer fluid
Replacement only:
- Replace night vision camera Replacing Night Vision Camera