Removing and Installing/Replacing Actuator for Left or Right Rear Seat Backrest (Through-Loading System)

52 26 303 - Removing and installing/replacing actuator for left or right rear seat backrest (through-loading system)





Special tools required:
- 00 9 317 00 9 317 Trim Panel Wedge





Unclip Bowden cable (1).

Loosen screws (2).

Unlock catch (3) to center of car and at same time unclip actuator towards bottom (4). If necessary, insert special tool 00 9 317 00 9 317 Trim Panel Wedge between actuator and body for levering out.





Installation:
Catches (1) and (2) of actuator (3) must not be damaged.

Bowden cable (4) must be correctly engaged in actuator (3).