Removing and Installing/Replacing All Guide Sleeves for Rear Head Restraints

52 24 ... - Removing and installing/replacing all guide sleeves for rear head restraints





Special tools required:
- 52 0 070 52 0 070 Release Hook





Necessary preliminary tasks:
- Remove head restraint Removing and Installing/Replacing Left or Right Rear Head Restraint from rear seat





1. Backrest
2. Guide sleeve of head restraint
3. Retaining lug
4. Head restraint mount





Insert special tool 52 0 070 52 0 070 Release Hook into guide hole of sleeve (2) up to upper area of retaining lug.
Feed release tongue of special tool into rear gap on retaining lug (1).
Turn tool to release sleeve (2) and pull out towards top.

Installation:
Replace faulty sleeves.