Removing and Installing/Replacing Exhaust Pipe With Catalytic Converter (N54)

18 32 082 - Removing and installing/replacing exhaust pipe with catalytic converter (N54)





Special tools required:
- 00 2 210 00 2 210 Exhaust Pipe Cutter





Warning!
Scalding hazard!

Only perform these tasks after exhaust system has cooled down.





Necessary preliminary tasks:
- Remove exhaust system Service and Repair.





Note:
The cutting lines for the exhaust pipes are designated by notches in the pipe.





Cut exhaust pipes at marked points with special tool 00 2 210 00 2 210 Exhaust Pipe Cutter and deburr.





Release nuts and replace during installation.

Installation Note:
Tightening torque, 18 00 1AZ 18 31 Exhaust Pipe with Catalytic Converter/Complete System.





Installation Note:
Connect exhaust pipe to center muffler by means of clamp and align.

Align clamp and tighten down.

Tightening torque 18 00 5AZ 18 31 Exhaust Pipe with Catalytic Converter/Complete System.





Note:
Check exhaust system for leaks.