Removing and Installing/Replacing Steering Wheel (From 03/07)

32 33 001 - Removing and installing/replacing steering wheel (from 03/07)





Note:
Wheel/chassis alignment is not necessary after the steering wheel has been removed and installed or replaced.





Necessary preliminary tasks:
- Remove airbag unit Removing and Installing/Replacing Airbag Unit
- Replacement only: Remove retaining plate for multifunction steering wheel switch Service and Repair





Move wheels/steering wheel into straight-ahead position.
Disconnect plug connection (1).
Release screw (2) and remove steering wheel.

Installation:
Make sure connecting lead(s) is/are correctly laid.
Tightening torque 32 33 1AZ [1][2]Specifications.





Important!
Risk of damage!
Driver (1) must engage in opening (2).

Installation:
Align steering wheel using grooved toothing to steering column and attach.





Replacement:
- Modify Lane Departure Warning motor electrics Removing and Installing/Replacing Lane Departure Warning Motor Electrics (Standard Steering Wheel)