Replacing Night Vision Camera

66 54 511 - Replacing night vision camera





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Important!
New component contains a CD with deblocking code.
Deblocking code CD is requested during coding/programming by the SSS.
Coding/programming without the deblocking code CD is not possible!





Necessary preliminary tasks:
- Remove night vision camera Removing and Installing Complete Night Vision Camera





Release screw (1) on both sides.
Remove camera (2) from holder (3).





Installation Note:
Insert camera (1) in holder (2).
Left guide pin (3) must be correctly seated in holder (2).
Apply screw securing adhesive to screw (4) and tighten screw.





Tab (1) must snap noticeably into holder (2).
Make sure guide pin (3) is correctly seated in holder.
Apply screw securing adhesive to screw (4) and tighten screw.





Installation Note:
- Carry out coding/programming Programming and Relearning.
- Adjust night vision camera Adjustments