Replacing Cover Bowl

41 63 003 - Replacing cover bowl





Necessary preliminary tasks:
- Remove flap for fuel filler neck Removing and Installing Flap for Fuel Filler Neck.
- Remove actuator drive for tank filler flap Removing and Installing/Replacing Servodrive for Tank Filler Flap.





Lever out ejector (1) in direction of arrow.
Press retaining strap (2) inwards and remove.
Lever out seal (3) from cover bowl (4).





Turn cover (1) through approx. 45° and lever out in direction of arrow.
Lever out cover bowl (3) at rear over opening (2).





Installation:
Catches (1) on ejector (2) must not be damaged.
Fit cover cap (3) correctly.





Installation:
Locks (1) on left/right of cover (2) must not be damaged.





Close flap (1).
Twist cover bowl (2) in direction of arrow out of side panel and remove.





Installation:
Following parts on cover bowl (6) must not be damaged or missing:
1 - Rubber pad
2 - Catches, top/bottom
3 - Spring
4 - Catch
5 - Guide