Rear Seat, Through-Loading

72 60 057 - Removing and installing/replacing ski bag





Fold center armrest downwards.
Unlock cover lid (1) by pulling on handle (2) and fold downwards.





Release locks on trim (1) with a screwdriver (2).
Remove trim (1).





Release screws (1) and (2).

Installation:
Insert screw (2) in nut on retaining strap for ski bag.





Remove ski bag cassette (1) in direction of arrow from rear partition.





Installation:
If necessary, perform this work step with assistance of a second person.
Ski bag cassette (3):
- insert with locking lugs (2) into openings (1)
- press against rear partition
- slide to left until locking lugs (2) snap into place
- insert screws from passenger compartment and tighten down.