Removing and Installing/Replacing Control Unit for Night Vision System

66 54 005 - Removing and installing/replacing control unit for Night Vision System





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead Disconnecting and Connecting Battery Negative Lead
- Remove safety information module Removing and Installing (Replacing) Safety Information Module.





Disconnect plug connection (1), press lug (2) downwards and remove control unit (3) from module carrier.





Replacement:
Carry out coding/programming Programming and Relearning.

Note:
New component contains a CD with deblocking code.
CD is requested during coding/programming by the SSS.