Body Control Module: Service and Repair

65 82 530 - Replacing MOST CAN gateway control unit





Special tools required:
- 64 1 020 64 1 020 Release Hook





Necessary preliminary tasks:
- Remove control display Removing and Installing/Replacing Control Display.





Lever out lugs (1) in direction of arrow.





Lift housing of control display (1) over catches (2) using special tool 64 1 020 64 1 020 Release Hook.
Fold up control display (2) in direction of arrow and feed out of MOST CAN gateway control unit (3).





Installation:
Do not kink ribbon cables (3) when assembling control display (2) and MOST CAN gateway control unit (1).





Unlock plug connections (1) and disconnect.
Remove MOST CAN gateway control unit (2) from control display (3).





Replacement:
Carry out coding/programming.
Observe following IDC specifications:
- Programming
- Coding
- Car & Key Memory
- CD "CIP"