Removing and Installing/Replacing Drivers Seat Sensor

65 77 750 - Removing and installing (replacing) driver's seat sensor





Warning!
Note airbag safety instructions [1][2]Safety Regulations for Handling Components with Gas Generators!
Incorrect handling can activate airbag and cause injury.





Note:
To facilitate installation/removal of sensor, move seat upwards fully.

Follow instructions for handling optical fibers 61 00 ... Notes on Handling Optical Fibers.





Necessary preliminary tasks:
- Disconnect and cover battery negative lead Instructions for Disconnecting and Connecting Battery.





Unclip trim in upper rail at front (1) in direction of arrow and remove.





Unlock plug connections (1) and disconnect.
Unlock catches (2).

Installation Note:
Make sure driver's seat sensor (3) is correctly engaged.

Feed out driver's seat sensor (3) in direction of arrow and remove.





Replacement:
Carry out coding/programming.
Observe following IDC specifications:
- Programming

- Coding

- Car & Key Memory

- CD "CIP"