Brake Light Switch: Service and Repair

61 31 310 - Replacing brake light switch





Necessary preliminary tasks:
- Remove trim panel for pedal assembly 51 45 185 Removing and Installing/Replacing Panel For Pedals.





Disconnect plug connection (1).
Pull brake light switch (2) in direction of arrow out of brake light switch holder (4).

Installation:
- Press brake pedal (3) to floor.
- Push brake light switch (2) as far as it will go into brake light switch holder (4).
- Grip brake light switch holder (4), slowly return brake pedal (3) to starting position and pull back to stop.





Note:
Removing brake light switch holder (1):

Press brake pedal.

Unclip brake light switch holder (1) at limbs (2) and remove towards rear.