Removing and Installing/Replacing Drive for Left or Right Roller Sun Blind

67 65 019 - Removing and installing/replacing drive for left or right roller sun blind

Remove and install rear door trim Removing and Installing Left or Right Rear Door Trim Panel.





Note:
Removal is shown on drive for roller sun blind (door window). Roller sun blind (fixed door window) is removed in same way.

Unlock plug connection (1) and disconnect.
Release screws (2).

Installation:
Observe tightening torque, 67 65 1AZ [1][2]Specifications.

Remove drive for roller sun blind (3) in direction of arrow.





Installation:
Toothing (1) of drive for roller sun blind (2) must be placed exactly on shaft (3).