Trunk / Liftgate: Adjustments

41 62 014 - Adjusting rear lid





Read contents of Body, General.
Refer to the description texts of the KSD CD (FRU 41 62 014) for details of stripping-down and rigging work.

Note:
Following components must be correctly fitted and adjusted:
- Convertible top compartment lid Adjustments

The gap dimensions serve as the basis for adjustment work.

Make unpainted surfaces visible by also moving the hinges. Touch these up in the appropriate colour.





Slacken screws (1) on rear lid hinge to rear lid until such stage that rear lid can still be moved.
Adjust rear lid vertically and lengthways.
Retighten all screws.
Tightening torque 41 62 1AZ [1][2]41 62 Rear Lid.

Note:
If lateral adjustment is necessary, it is essential to adjust the convertible top compartment lid; carry out this adjustment if necessary.
Only then carry out lateral adjustment with spacer plates on rear lid hinge.

Adjust rear lid lock Adjustments.

Adjust bump stops Adjustments.