Front Door Window Motor: Service and Repair

67 62 000 - Removing and installing / replacing flat motor for front left or right power window unit





Necessary preliminary tasks:
- Remove power window unit Service and Repair in front door





Release screws (1), tightening torque 67 62 1AZ [1][2]51 33 Power Windows, Front.
Detach flat motor for power window unit (2) from power window unit and remove.

Installation:
Fit flat motor for power window unit (2) exactly on teeth of power window unit.





Replacement:
A normalization must be carried out in order to activate anti-trapping protection.
Operating sequence for normalization:
- Operate corresponding power window switch in "Close" setting.
- Once the upper end position has been reached, hold power window switch down for approx. 1 second more.
Normalization is thus completed.






Note:
Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).