Utility Storage Compartment Lock: Service and Repair

51 16 248 Removing And Installing/replacing Lock On Rear Storage Box

Necessary preliminary tasks:
- Remove cover on panel for rear storage box







Release screws (1) on lock (2).

Installation:
Press lock (2) to right (3) and tighten screws (1).







Release spring washer (1) and pull out pin with spring washer (2).
Disconnect cable (3) from mounting (4).







Pull trims (1) in direction of arrow and pull out lock (2) in direction of arrow towards bottom.
Feed cable (3) out of guides (4)
Remove lock (2).

Installation:
Join lock and servomotor correctly.
Lay emergency release cable (3) correctly in guides (4) of lock (2).