Air Bag Control Module: Service and Repair

Removing and Installing/ Replacing Airbag Control Unit


Warning!
Note airbag safety regulations!
Incorrect handling can activate airbag and cause injury.


Necessary Preliminary Tasks:
- Disconnect battery earth lead and cover, Service and Repair.
- Remove rear storage box, Service and Repair.
- Partially remove storage compartment.





Release screws (1) on both sides and remove bracket (2).




Release screws (1) and remove airbag control unit (2).




Tightening Torque, 65 77 1AZ.

Installation Note:
- Ensure grounding cable (3) is correctly seated.




Disconnect plug conenctions (1) and remove airbag control unit (2).

Replacement:
Carry our encoding/programming.




Observe following IDC specifications:
- Programming
- Encoding
- If necessary, vehicle & key memory
- CD "CIP"