65 11 080 Removing and Installing/Replacing Radio

65 11 080 Removing And Installing/replacing Radio







NOTE: Comply with notes and instructions on handling optical fibres .







Necessary preliminary tasks:
- Clamp off battery negative lead
- Remove control panel for heating and A/C system







Release screws (1).

Pull back radio (2) slightly.

Disconnect associated plug connections and remove radio (2).

Installation:
Make sure the rear guide pin of the radio (2) is correctly seated in the associated mounting.







US version only:
If there is a violet aerial connection (1) as well as the black aerial connection (2), additional tasks are required when replacing the radio.

Read and observe document Replacing satellite tuner .







Replacement:
Carry out vehicle programming/encoding .