Removing and Installing/Replacing Complete Lock Cylinder in Left or Right Front

51 21 140 Removing And Installing/Replacing Complete Lock Barrel In Left Or Right Front Door







Lever out cap (1) and release screw underneath.

Installation:
If necessary, replace faulty trim (1).







Insert ignition key into lock barrel.

Turn ignition key slightly and pull off cover (1) in direction of arrow with outside door handle (2) opened slightly.

Installation:
Lock barrel must be correctly seated in door lock.

Check function of lock barrel.







Version with light package:

Installation:
Make sure outside door handle light (1) is correctly positioned in area (2).

Guides (3) of outside door handle light (1) must be correctly seated in carrier for outside door handle (4).







Replacement:

Remove catches (1) and detach cover (2) from lock barrel (3).

Installation:
Catches (1) of cover (2) must not be damaged.

Paddle (4) of lock barrel (3) must not be damaged.