Quarter Window Glass Weatherstrip: Service and Repair

51 37 240 - Removing and installing or replacing outer window cavity cover strip for door window, rear left or right





Special tools required:





Important!
The "Instructions on fitting window guides" serve as the basis for this repair instruction and must be observed without fail.





Necessary preliminary tasks:
- If necessary, open convertible top
- If necessary, open side window glass





Note:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.





Important!
Risk of damage!

The weatherstrip (4) can bend when lifted out too far.

Attach adhesive tape under window cavity cover strip (4) (damage to paintwork).

Detach seal (1) at retaining elements (2) and shaped part (3) from side panel.

Using special tool 00 9 311 beginning at rear, carefully lever out window cavity cover strip (4).

Installation Note:
Ensure seal (1) is correctly seated.

Retaining elements (2) and shaped part (3) must not be damaged.

If necessary, moisten window cavity cover strip (4) prior to fitting with approved anti-friction agent.