84 11 519 Removing and Installing/Replacing Eject Box

84 11 519 - Removing and installing or replacing eject box





Special tools required:





Pull off gaiter (1) towards top.

Disconnect plug connection (2).

Unclip plug connection for antenna lead from mounting and disconnect.





Snap out eject box (1) with special tool 00 9 340 on inner side of trim (2).

Pull eject box (1) on inner side upwards slightly.





Snap out eject box (1) with special tool 00 9 340 on outer side of trim (2).

Lift out eject box (1) and feed out wiring harness.

Installation:
Make sure wiring harness is correctly laid.

Eject box (1) must snap audibly into trim (2).





Installation:
Catches (1) on trim (2) must not be damaged or missing.