Installation Position, Seat Occupancy Electronics
Installation Position, Seat Occupancy Electronics
Fig. 0: Seat-occupancy mat not in installation position
Fig. 1: Conductor path in front of electronics has slipped
Fig. 2: Conductor paths on transverse seams slipped
Fig. 3: Cast electronics box is displaced or raised
Fig. 4: Use fabric adhesive tape to attach the electronic component into the recess in the seat cushion padding
Fig. 5: Seat-occupancy mat is kinked
Fig. 6: connector not correctly snapped in and not correctly locked in the mounting of the base springs
Fig. 7: connector correctly snapped in and correctly locked in the mounting of the base springs
Fig 8a: Secure the central seat connector with cable straps
Fig. 8b: Position of cable strap
Fig. 8c: Module locking of central seat connector
Fig. 8d: Holder for central seat connector
Fig. 9: Latch mechanism, central seat connector
