Removing and Installing/Replacing Window Cavity Cover Strip on Inner Front Door
51 21 330 - Removing and installing/replacing window cavity cover strip on inner front door
Necessary preliminary tasks:
- Remove front door trim panel Removing and Installing Left or Right Front Door Trim Panel
Important!
The "Instructions on fitting window guide seals Removal and Replacement" serve as the basis for this repair instruction and must be observed without fail.
Lever out cover (1) at rear slightly.
Start at rear with removal of window cavity cover strip (2).
Pull off window cavity cover strip (1) towards top.
Installation:
If necessary, replace faulty retainers (3).
Insert window cavity cover strip (1) below cover (2).
Installation:
Moisten window cavity cover strip (1) prior to fitting with approved anti-friction agent Removal and Replacement.
Start with installation at front.