67 62 000 Removing and Installing/Replacing Flat Motor For Front Left or Right Power Window Unit

67 62 000 Removing And Installing/Replacing Flat Motor For Front Left Or Right Power Window Unit







Necessary preliminary tasks:
- Remove power window unit in front door







Release screws (1).

Tightening torque 67 62 1AZ.

Detach flat motor for power window unit (2) from power window unit and remove.

Installation:
Fit flat motor for power window unit (2) exactly on teeth of power window unit.

Carry out function check (one-touch function, anti-trapping protection and, if necessary, comfort function).







Replacement:
A normalization must be carried out in order to activate anti-trapping protection.

Operating sequence for normalization:

- Operate corresponding power window switch in "Close" setting.
- Once the upper end position has been reached, hold power window switch down for approx. 1 second more.

Normalization is thus completed.