61 35 107 Removing and Installing/Replacing Junction Box Electronics

61 35 107 - Removing and installing or replacing Junction Box electronics





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead
- Remove footwell side trim panel [1][2]51 43 075 Removing and Installing/Replacing Side Trim Panel, Footwell, on A-Pillar, Right on A-pillar, right
- Remove trim for instrument panel 51 45 181 Removing and Installing/Replacing Bottom Right Trim For Instrument Panel, bottom right





Note:
Glovebox removed for purposes of clarity.

Disconnect plug connection (1).
Release screws (2) and remove junction box electronics (3) from holder.





Disconnect plug connection (1).

Installation Note:
Make sure junction box electronics is correctly seated on plug connection (2) of holder.





Replacement:
Carry out vehicle programming/coding Programming and Relearning.
Delete transport mode.