Removing and Installing/Replacing Ignition Coil Cover

11 00 - Removing and installing/replacing ignition coil cover (N54)





Necessary preliminary tasks:
- Remove microfilter housing 64 31 092 Removing and Installing/Replacing Microfilter Housing (Lower Section)
- E60/E61 only:Remove tension strut





Release screws.
Tightening torque 11 12 7AZ 11 12 Cylinder Head with Cylinder Head Cover.
Remove ignition coil cover (1) towards top.

Note:
For purposes of improved clarity, illustration and descriptions shows wiring harness and tension strut removed.