Removing and Installing/Replacing Right Engine Hood/Bonnet Lock

51 23 100 - Removing and installing/replacing right engine hood/bonnet lock





Special tools required:
- 00 9 317 00 9 317 Trim Panel Wedge





Unclip coupling (1) with special tool 00 9 317 00 9 317 Trim Panel Wedge from side panel.

Lever out cover (2) at coupling (1).

Lever Bowden cable (3) out of coupling (1).

Note:
The operation "Disconnect pull cable for hood/bonnet locks" ends here.





Release Bowden cable (1) from holder (2).





Release screws (1).

Feed out hood/bonnet lock (2) in direction of arrow.

Tightening torque 51 23 2AZ 51 23 Hood/Bonnet Locks.





Disengage Bowden cable (1) in direction of arrow from hood/bonnet lock (2).