Replacing Seat Cover for Rear Seat

52 24 400 - Replacing seat cover for rear seat





Special tools required:
- 52 0 050 52 0 050 Pliers





Necessary preliminary tasks:
- Remove seat frame Removing and Installing/Replacing Seat Frame





Security version only:
Middle belt not fitted.
Remove trim (1).





Detaching cover and padding:
- If necessary, mark seating of retainers
- Release retainers in marked areas
- Remove seat cover from padding
- Remove all remaining retainers from seat cover and/or padding

Installation:
- Feed cable through hole in padding
- Insert new retainers with special tool 52 0 050 52 0 050 Pliers. In so doing, enclose wire in padding and trim wire of cover





Replacing cover:
- Pull all trim wires out of seat cover
- If necessary, cut in take-up for trim wires of new cover
- Push trim wires into new seat cover