Air Cleaner Housing: Service and Repair

13 71 000 - Removing and installing/replacing intake filter housing (N54)





E82, E88, E90, E91, E92, E93 only:

Necessary preliminary tasks:
- Remove microfilter housing
- Remove intake duct





E60, E61 only:
Lift out expansion rivet (1).
Unclip air duct (2) from intake filter housing and remove.





Release clamp and detach air intake hose.
Tightening torque 13 71 1AZ 13 71 or 72 Air Intake Silencer.
Unlock and disconnect line (1).
Unclip line (1) from air filter housing.





Release clamp and detach air intake hose.
Tightening torque 13 71 2AZ 13 71 or 72 Air Intake Silencer.
Pull off wiring harness holders (1) in upward direction.
Detach intake filter housing (2) from bearings pins of rubber mounts in upward direction and remove.

Installation:
Make sure intake filter housing rubber mounts are correctly seated on bearing pins.