12 14 524 Replace Pulse Sensor on Exhaust Camshaft

12 14 524 - Replacing pulse generator on exhaust camshaft (N54)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Switch off ignition
- Remove fan cowl





Unlock plug (1) and remove.
Release screw.
Tightening torque 12 14 4AZ 12 14 Electronic Shift Units or Control Units.
Remove pulse generator (2).





Note:
Check stored fault messages.
Now clear the fault memory.