Installing Replacement Transfer Case (ATC 300)

27 10 020 - Installing replacement transfer case (ATC 300)





Important!
After replacement, the "Repair" service function must be carried out with GT1.





Recycling:
Catch and dispose of escaping transmission oil. Observe country-specific waste-disposal regulations.





Important!
After completing work, check transmission oil level and top up if necessary.
Release filler plug (1).
Check oil level.
Tightening torque 27 00 11AZ [1][2]Mechanical Specifications.
Pour in transmission oil up to lower edge of opening for filler plug (1).
Use only the approved transmission oil.

Failure to comply with this requirement will result in serious damage to the transfer case!





Necessary preliminary tasks:
- Drain transmission oil Procedures at oil drain plug

Tightening torque, 27 00 11AZ [1][2]Mechanical Specifications.

- Remove transfer case Removing and Installing Transfer Case (ATC 300)





Modify following parts:
- Covers and protective caps

- Drive shaft transportation lock

- Vent hose of transfer case