Removing and Installing/Replacing Rear Lid Lock (Upper Section)

51 24 100 - Removing and installing/replacing rear lid lock (upper section)





Necessary preliminary tasks:
- Remove panel for rear lid





Detach emergency release mechanism (1) on rear lid lock (2).
Release screws (3) on rear lid lock (2).
Disconnect plug connection (4) on servodrive (5) and remove rear lid lock (2).

Installation:
Use self-tapping screws.





When replacing emergency release mechanism:
Lever out clip (1) and remove emergency release mechanism (2).





When replacing rear lid lock:
If necessary, release screws on servodrive for rear lid locking.





Detach servodrive for rear lid locking (1) in direction of arrow from rear lid lock (2).