Removing and Installing/Replacing Blocking Circuit

65 24 020 - Removing and installing or replacing blocking circuit





Necessary preliminary tasks:
- Remove rear right head restraint Removing and Installing / Replacing Rear Head Restraints.
- Remove panel for roof pillar at rear left Removing and Installing/Replacing Trim Panel For Left or Right Rear Roof Pillar.





Unlock plug connections (1) and disconnect.
Release screw (2).
Remove blocking circuit (3) in direction of arrow.





Installation:
Fit blocking circuit (1) so that screw (2) engages thread (3) and locating pin (4) engages bore (5).