51 45 185 Removing and Installing/Replacing Panel For Pedals

51 45 185 - Removing and installing/replacing panel for pedals





Release screws (1).
Unclip trim for pedal assembly (3) at retaining points (2).
Pull back panel for pedals (3) in direction of arrow.
Disconnect associated plug connections and remove trim for pedal assembly (3).





Important!
Disconnecting the plug connection for the hands-free system speaker results in fault memory entries in the telephone control unit (limitation in the emergency SOS call system).
After fitting, read out fault memory and if necessary delete entries.





Installation Note:
Guides (1) and clips (2) of trim for pedal assembly (3) must not be damaged.

Replacement:
- Remove speaker of hands-free system Removing and Installing/Replacing Hands-Free System Speaker(4).

- Remove footwell light Removing and Installing/Replacing Footwell Light(5).