51 11 ... Removing and Installing/Replacing Holder For Side View Camera on Left or Right

51 11 ... Removing And Installing/Replacing Holder For Side View Camera On Left Or Right







Necessary preliminary work:
- Remove side view video camera
- Pull side view video camera holder off bumper with a suitable tool (holder is secured with double-sided adhesive tape).







Installation:
Holder (1) is encoded against incorrect installation.
Identification (2) indicates on which side of the vehicle holder (1) is stuck in.
For installation position observe shape of holder (1).







Installation:
Clean bonding surface on bumper trim (4) and remove adhesive residues.
To position holder (1) optimally, pre-install camera (3) on holder (1) before sticking in the holder.
Outer edge (2) on holder (1) must be flush with outer bumper edge (4).