Trunk / Liftgate: Service and Repair

41 62 000 Removing And Installing Rear Lid







Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD CD (FR number 41 62 000).

Necessary preliminary tasks:
- Remove panel for rear lid.
- Disconnect all cable plug connections and pull wiring harness out of rear lid.







Carry over the work step shown symmetrically to the other side of the vehicle.
Release screws (1).
Slacken screw (2) and remove rear lid with a second person.
Tightening torque 41 62 1AZ.







Installation:
Install rear lid at screw locations on hinge.
If necessary, adjust trunk lid.

If reversing camera optional equipment installed:
Calibrate reversing camera.