Collision Avoidance - TRSVC Module Fails Programming
SI B66 01 11Distance Systems, Cruise Control, Remote Control
May 2011
Technical Service
This Service Information bulletin supersedes SI B66 01 11 dated May 2011.
[NEW] designates changes to this revision
SUBJECT
Top Rear Side View Camera Control Module Fails Programming and Calibration
MODEL
F01, F02 (7 Series)
F04 (ActiveHybrid 7)
F07 (5 Series)
Vehicles produced to 2/28/10 or with an integration level prior to F001-10-03-501
SITUATION
The TRSVC (Top Rear Side View Camera) control module may fail programming using ISTA/P (Integrated Service Technical Application/Programming) 2.41.0, 2.41.1 or 2.41.2.
The affected vehicles are equipped with at least one of the following options:
^ 508 - Park Distance Control (PDC)
^ 3AH - Reversing Camera
^ 5DK - Side View Camera
CAUSE
Software error in the TRSVC control module
[NEW] PROCEDURE
To avoid having the TRSVC (Top Rear Side View Camera) control module fail during a vehicle software update procedure, only program these vehicles with ISTA/P 2.41.3 or higher.
If you had one of these vehicles where the TRSVC (Top Rear Side View Camera) control module failed during a vehicle software update procedure, reprogram the vehicle with ISTA/P 2.41.3 or higher. Submit the repair as outlined below.
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales / Aftersales Business Development & Marketing Portal / Service Operations / Workshop Technology / Vehicle Programming.
[NEW] WARRANTY INFORMATION