Collision Avoidance - Camera View Appears Upside Down

SI B 66 02 10
Distance Systems, Cruise Control, Remote Control

January 2010
Technical Service

SUBJECT

Initialization of the Top View Camera

MODEL

F01, F02 (7 Series)

SITUATION

The display in the central information display (CID) for one or more of the three cameras used in the Top Rear Side View Camera (TRSVC) system may appear upside down or simply not display any image.

No relevant fault codes are stored in the TRSVC module.

This situation typically occurs on new vehicles during the Pre-Delivery Inspection (PDI) or after the electrical system of the car has been worked on.

CAUSE

One or more of the cameras have lost initialization.

PROCEDURE

Initialize the TRSVC system via ISTA/D, using the following procedure:

^ Perform a Vehicle Test.

^ Select the Service Function tab.

^ Select Body/Panorama Camera and then Start Search.

^ Select the test plan AS6653_TRSVCFX-Calibration, all-around vision camera.

^ Select Display.

^ Start the test plan.

During the calibration procedure, the cameras will be initialized.

WARRANTY INFORMATION

Covered under the terms of the BMW New Vehicle Limited Warranty.

Defect Code: 66 53 06 14 00

Labor Operation: Labor Allowance: Description

Refer to KSD Refer to KSD Initialize TRSVC