P2303

2754 - P2303

Information saved in
DME

Fault code
2754 - P2303

Fault text
ignition cylinder 2, activation

Fault description
Ignition Coil 'B' Primary Control Circuit Low

Condition for fault identification
Test condition:
Voltage at PIN A_S_ICC too low, ignition channel inactive
Terminal condition: TERM87
Voltage condition:
Battery voltage > 9.8V (k_diag_tr_ub_min)

Condition for fault memory entry
8 operating cycles

Action in service
1. Check plug and wiring harness on M ignition coil
2. Check M ignition coil as indicated
3. If shorts to ground are entered for all cylinders check fuse
for TERM87 power supply

Fault effect and breakdown warning
CC message
Engine speed limited
Power reduction
Rough idle

Driver information
Warning light:
MIL, EML, CC message, backup program

Service instruction
none