33 17 005 Replacing Rubber Mount For Rear Differential Mounting at Rear

33 17 005 - Replacing rubber mount for rear differential mounting at rear (M3)





Special tools required:
- 33 0 100
- 33 0 101
- 33 0 102
- 33 0 103
- 33 0 104
- 33 0 105
- 33 0 106






Necessary preliminary tasks:
- Remove rear differential 33 10 010 Removing And Installing/Replacing Rear Differential





Withdraw PUR mount with special tools 33 0 101 , 33 0 102 , 33 0 105 , 33 0 106 from rear axle carrier (1).






Important!
Coat bearing bushing in rear axle carrier and new rear PUR mount (2) with Circolight (refer to BMW Parts Service).

Draw PUR mount (2) in direction of arrow with special tools 33 0 103 , 33 0 104 , 33 0 105 and 33 0 106 into rear axle carrier (1).

Installation:
- Observe mounting sequence.





Mounting sequence:
To avoid damaging the PUR mount (1), draw in the mount in stages.
Procedure:
- Draw PUR mount (1) 5 mm into rear axle carrier
- Release special tool 33 0 100 .
- Turn special tool 33 0 103 in direction of arrow (A) 45°
- Repeat procedure until PUR mount (1) is pressed in up to stop