P0342

2716 - P0342

Information saved in
DME

Fault code
2716 - P0342

Fault text
Bank 1 intake camshaft position sensor

Fault description


Condition for fault identification
Test condition:
Engine running
Terminal condition: Terminal 87
Voltage condition:
ub > K_ED_PlusMin

Condition for fault memory entry
Less than K_VAN_RAD_Min pulses within one working
cycle, 10 consecutive working cycles

Action in service
2. Check plug and wiring harness at Bank 1 camshaft
position sensor,
2. check gap between sensor and reluctor
3. Replace Bank 1 camshaft position sensor.

Fault effect and breakdown warning
Reduced power / MIL lights up after engine runs 2x

Driver information
Warning light:
No

Service instruction
none