Memory Systems - Seat Adjustment Logic Change

SI B52 01 09
Seats

June 2009
Technical Service

This Service Information bulletin supersedes SI B52 01 09 dated January 2009.

[NEW] designates changes to this revision

SUBJECT
Seat Adjustment when Unlocking

MODEL
E64 (6 Series Convertible)

INFORMATION
The seat adjustment logic, which is activated when the vehicle is unlocked, changed in 9/2007.

^ [NEW] For vehicles produced between 9/2007 and 3/2009, the "Last seat position after unlocking" setting in the CID is present, but is no longer active. The selection is grayed out and cannot be selected.

^ [NEW]For vehicles produced from 3/2009, the selection is not present.

^ [NEW]For vehicles from all production dates, the "Last seat position after opening the door" selection is still available, and can be turned on or off.

In addition, this change was implemented in Progman V27.0. Therefore, when programming and coding an E64 produced prior to 9/2007, using either Progman or ISTA/P, the "Last seat position after unlocking" selection will no longer be available.

This running change was made intentionally, and it is not possible to retrofit this feature.

WARRANTY INFORMATION
For information only





Disclaimer