Body Control Module: Service and Repair

61 35 122 - Removing and installing/replacing general module





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Read out programming/coding Programming and Relearning.
- Print out and make a note of settings for car and key memory in CKM menu





Necessary preliminary tasks:
- Disconnect negative battery cable
- Remove right glovebox with housing 51 16 366 Removing and Installing Right Glovebox With Housing





Release plastic nut (1).
Unclip device holder (2) from fixtures (3).
Unlock plug connections (4) and disconnect.
Press catch (6) and remove general module (5) towards rear.





Replacement:
Carry out programming/coding Programming and Relearning.
- Check printed-out or noted-down settings for car and key memory in CKM menu and reset if necessary