Removing and Installing/Replacing Bottom Right Control Arm

33 32 087 - Removing and installing/replacing bottom right control arm





Note:
If the lower control arm is detached from the rear axle carrier/trailing arm, it is necessary after reinstallation to carry out a wheel/chassis alignment check.





Necessary preliminary tasks:
- Remove rear wheel Removing or Installing Front or Rear Wheel.
- Remove output shaft from rear differential

Note:
The subsequent procedure is described in the document "Removing and installing/replacing lower left control arm Removing And Installing/Replacing Bottom Left Control Arm".





After installation:
- Check that output shaft is correctly seated in rear differential.
- Perform chassis alignment check