Procedures

31 00 ... - Front axle + steering: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:
- Release of following screw/bolt connections:

- Steering gear to front axle carrier

- Control arm to front axle carrier

- Support bearing to body (if centering pin is missing)

- Tie rod end to tie rod

- Replacement of following parts:

1. Front axle carrier

2. Steering gear

3. Gaiter (if the tie rod end has to be screwed off)

4. Control arm / rubber mount

5. Support bearing (if centering pin is missing)

6. Swivel bearing

7. Tie rod end

8. Tie rod