Removing and Installing Door

41 5. ... - Removing and installing door





Important!
Do not damage adjoining body parts.

The illustrations are schematic representations and are to be applied to the relevant vehicle type.
Open door.





Release screw on connector frame.
Front door:
Tightening torque 41 51 4AZ [1][2]41 51 Front Doors.
Rear door:
Tightening torque 41 52 4AZ [1][2]41 52 Rear Doors.





Note:
Secure door against closing.

Release screw (1) on door retainer.
Front door:
Tightening torque 51 21 3AZ 51 21 Front Door Locks.
Rear door:
Tightening torque 51 22 3AZ [1][2]51 22 Door Locks, Rear.
Open door up to stop.





Release nuts between both hinge elements at top and bottom.
Front door:
Tightening torque 41 51 1AZ [1][2]41 51 Front Doors.
Rear door:
Tightening torque 41 52 1AZ [1][2]41 52 Rear Doors.





Pull plug connection from door pillar, unlock by pulling out bar and detach.
Unhinge door by moving upwards and placing it on a suitable surface.

Installation Note:
If necessary, adjust door Adjustments.