51 16 360 Removing and Installing Right Glove Box

51 16 360 Removing And Installing Right Glove Box







When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.







Necessary preliminary tasks:
- Remove Central Information Display
- Remove right fresh-air grille
- Remove insert for glovebox







Lever out cover (1) and release screw underneath.
Unfasten screws (2 and 3).
Unclip light (4) and disconnect plug connection.








E70/71 up to 09/09 only
Disengage Bowden cable (1) on left and right at lock (2).

Installation:
Carry out function check on emergency release mechanism.







Additionally as of 09/09
- Close lid of glove box (1) to prevent microswitch control from being damaged.

Pull out glovebox (1) slightly.
Disconnect all plug connections (2) and detach cable from glovebox.

Additionally E70/71 up to 09/09 only
- Disengage Bowden cable (3) on left and right at lock (4).

Remove glovebox (1).







E70/71 up to 09/09 only

Installation:
Attach Bowden cable head (1) on left and right before inserting glove box, then insert glove box.
Feed in spacer (2).