Engine Control - MIL ON/DTC's 46CE/4D11/4D12 Set
SI B12 09 09Engine Electrical Systems
December 2009
Technical Service
This Service Information bulletin supersedes SI B12 09 09 dated May 2009.
[NEW] designates changes to this revision
SUBJECT
M57Y The Service Engine Soon Lamp (MIL) Is On with Fault Codes 46CE, 4D11, or 4D12 Stored
MODEL
E90 335d produced up to 4/09
E70 X5 xDrive35d produced up to 4/09
SITUATION
The Service Engine Soon lamp (MIL) is illuminated with any of the following fault codes:
46CE: Reducing agent pressure line heating activation-short circuit to ground
4D12 or 4D11: Reducing agent dosage, long-term adaptation
CAUSE
DDE software calibration error
CORRECTION
Do not replace any parts.
Program the vehicle using ISTA/P 2.33.1 or later to the applicable target integration level.
E90 335d E89X-09-03-520 or higher
E70 X5 xDrive35d E070-09-03-520 or higher
Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.
For information on programming and coding with ISTA/P, refer to CenterNet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.
Important note:
The faults 4D11 and 4D12 may not be associated with any fault description text or a test plan in ISTA.
This is to be corrected with ISTA 2.14.
[NEW] After programming, it will be necessary to recalibrate the metering (dosing) valve, using an ISID with 2.17.1 or higher.
[NEW] To perform the calibration, go into Service Functions / 01 Engine / Diesel Electronics (US version) / SCR system / Activations and calibrations.
[NEW] Select "B1365_D7USANAB-Activation and calibration of SCR system M57TUTOP2 US Diesel" from the hit list.
[NEW] Follow the test plan and select [3], Run SCR calibrations and then [1], First NOx sensor and/or second NOx sensor and/or metering valve.
[NEW] This will reset the adaptations for the metering valve and the fault/s can be cleared from the fault memory.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty or the Certified Pre-Owned program.
Disclaimer